How to Create Your Own Apple Catcher: A Guide to Easy Harvesting

Harvesting apples that fall from the trees can be quite the challenge, but with a little creativity and effort, you can create your very own apple catcher. This simple yet effective DIY project will make your fruit-gathering process much easier. In this article, we will walk you through the process of creating and installing your apple catcher, ensuring a successful and enjoyable harvest.

Materials Needed for Your DIY Apple Catcher

To get started, you will need the following materials:

A piece of white tree netting A couple of thick curved poly pipes Ties or strings for securing the netting A ladder (optional, depending on the height of your tree) A helper (optional, for higher trees)

Step-by-Step Instructions

Step 1: Prepare Your Tree Netting

The first step is to prepare your white tree netting. This netting is specifically designed to catch apples and protect them from birds. Choose a piece that is large enough to cover the entire canopy of your apple tree. Measure the width of your tree to ensure you have enough material.

Step 2: Secure the Bottom of the Netting

Once you have your netting ready, begin by securing the bottom of the netting. This is typically done by tying it to the base of the tree. Use ties or strings to do this, ensuring that the netting hangs loosely but securely. This will prevent birds from easily getting in and accessing the apples.

Step 3: Install the Curved Poly Pipes

The next step is to install the thick curved poly pipes over the tree branches. These pipes act as the support for the netting. Loop the pipes around the branches in a way that they hold the netting in place. The pipes should be curved to fit the branches, providing a smooth transition and helping to distribute the weight of the netting evenly.

Step 4: Adjust and Secure the Netting

Once the pipes are in place, check the netting to ensure it is properly adjusted. The netting should be taut but not too tight, allowing for a snug fit around the branches and trunk of the tree. If necessary, adjust the ties or add more to ensure the netting is secure. This will help prevent the net from flapping in the wind and causing gaps.

Step 5: Inspect for Gaps and Adjustments

After setting up the apple catcher, take a step back and inspect it thoroughly. Ensure that there are no gaps or loose areas where birds could easily access the apples. Adjust the ties or move the pipes as needed to ensure full coverage. By doing this, you can prevent birds from stealing the apples and ensure a bountiful harvest for yourself.

Conclusion

Creating your own apple catcher is a simple and effective way to ensure an easy and enjoyable apple harvest. With just a few materials and a little bit of time, you can protect your apples from birds and enjoy the fruits of your labor. So get creative, follow these steps, and say goodbye to lost apples!

Keywords: Apple catcher, DIY, Tree netting