Proper Cleaning Methods for Commercial Grade Floors with Wax - A Guide

Managing commercial spaces requires careful attention to detail, especially when it comes to keeping floors looking their best. Waxing commercial floors is a common practice to maintain their appearance and durability, but the cleaning process for these floors can be more complex than simply wiping them down. This guide will walk you through the right way to clean commercial grade floors that have been waxed, ensuring they remain in excellent condition.

Understanding the Importance of Wax

Waxing commercial floors not only enhances their appearance but also helps in protecting them from wear and tear. It provides a smooth, durable surface that is easy to clean and maintain. However, the wax layer can attract dirt and grime, making proper cleaning essential.

The Right Cleaning Products: Once n Done by Armstrong

When it comes to cleaning commercial grade waxed floors, using the right products is crucial. One highly recommended product is the Once n Done by Armstrong. This specialized cleaner is designed to tackle even the toughest stains and ensures your floors look their best with minimal effort.

How to Use Once n Done

The Once n Done cleaner is incredibly simple and efficient. You need to:

Mix the cleaner in your mop bucket: Follow the manufacturer's instructions for the correct ratio of cleaner to water. Typically, this requires just a few ounces of cleaner per gallon of water. Mop the floor: Use a clean or new mop head, as these are available and relatively inexpensive. This helps in ensuring that the cleaning solution is evenly distributed and does not leave any residue.

Pre-Cleaning Tips for Really Dirty Floors

While the Once n Done cleaner is effective, there may be instances where the floor is exceptionally dirty. In such cases, a pre-cleaning step with hot soapy water is necessary. Here's how to do it:

Combine hot water and mild detergent: Fill your mop bucket with hot water and add a mild detergent. The temperature of the water is crucial for breaking down dirt and grease more effectively. Mop and soak: Mop the floor thoroughly, allowing the solution to soak into the dirty areas for a few minutes. This helps loosen and lift dirt and stains from the surface. Rinse and rewet: Wring out your mop thoroughly and use another clean mop to rewet the floor, ensuring no soap residue is left behind. This step is important to prevent any leftover soap from leaving a film on the waxed surface. Final clean: Once the floor is rinsed and rewet, use Once n Done according to the instructions to complete the cleaning process.

Additional Tips for Maintaining Commercial Grade Floors

Proper floor maintenance is not just about cleaning but also about regular inspections, routine care, and timely waxing:

Regular inspections: Check the condition of the floors regularly to identify any signs of wear and tear or areas that may require more attention. Daily maintenance: Sweep or vacuum daily to remove dust and debris. This helps in preventing the accumulation of grit and dirt that can scratch the floor's surface. Timely waxing: Waxing should be done as per the manufacturer's recommendations to ensure the protective layer remains intact and effective.

Conclusion

Cleaning commercial grade floors that have been waxed is a task that requires the right approach and tools. By using products like the Once n Done and following the steps outlined in this guide, you can ensure that your floors remain in excellent condition. Proper cleaning, maintenance, and timely waxing are key to maintaining both the appearance and longevity of your commercial flooring.