Why Is My Bedding Soaking Wet After a Wash Cycle? Troubleshooting Tips

Ever come out to find your bedding soaked after putting it through the washer? It can be quite frustrating, especially if everything else you wash is perfectly dry. There could be several reasons behind this issue, ranging from incorrect drainage to imbalances in the wash load. Here are some common causes and troubleshooting steps to help you resolve the problem.

Incorrect Draining

If your washer cannot drain the soapy wash water properly, it may result in water staying in the tub. This can make your bedding appear damp even after the drain and spin cycle. One possible cause is an incorrect drain hose. Make sure the drain hose is not kinked, pinched, or clogged. You can check this by running water through the drain hose or using a drain snake tool to clear any blockages. If the drain hose is old, it's a good idea to replace it with a new one.

Unbalanced Load

When you wash bulky items like blankets or towels, it can lead to an unbalanced load. This unbalance can prevent the washer from spinning properly, causing your bedding to still be wet at the end of the cycle. Ensure that the load is balanced by adding or removing items as needed. Even if your items aren't excessively bulky, it's a good practice to manage the load size to prevent imbalances.

Wrong Detergent

Using the wrong detergent can also contribute to your bedding being soaked. If you have a high-efficiency (HE) washer, make sure to use an HE detergent. HE detergents are designed to prevent excessive suds, which can add extra moisture to the load. Although your washer may not be HE, using an HE detergent can help prevent your bedding from being wet after washing. Check the detergent type recommended for your washer to ensure you are using the right one.

Leveling Issues

The leveling of your washer can affect its spinning ability. If your washer is not sitting level on the floor, it can cause the drum to spin improperly, leading to wet bedding. Use a leveling tool to check if the washer is tilting to one side. If it is off level, adjust the washer's feet to make it level.

Additionally, if you suspect a leveling problem, you can also try to manually turn the leveling foot adjustment screws to get the washer to sit level. Consult your owner's manual for specific instructions on how to adjust the leveling feet.

Faulty Drain Pump

If the drain hose is not the problem, a faulty drain pump could be the culprit. A small object, article of clothing, or a damaged impeller could be obstructing the pump. In some cases, the drain pump may have failed electrically. To diagnose this, first remove any blockages and clean the pump. If the issue persists, it may be necessary to replace the drain pump.

When to Seek Professional Help

If you have tried the above troubleshooting steps and the issue still persists, it may be best to call a trained technician to further diagnose and repair the problem. Professional assistance can ensure that the issue is correctly identified and resolved, potentially saving you from further frustration or damage to your washer.

Learn More:

Why Is My Laundry Soaking Wet After a Wash Cycle? Clothes Still Wet After Spin Cycle? Here's What to Do 5 Common Causes of Clothes Still Soaked After the Washer is Finished